Kolsch

Posted by Bens Stuff | 6:06 AM | | 0 comments »



  • 10 lbs German Pilsner Malt
  • 0.5 lbs German Munich Malt
  • 1.5 oz Spalt hops (4% AA bittering for 60 minutes)
  • White Labs WLP029 German Ale/ Kölsch or Wyeast 2565 Kölsch

    If you are an extract brewer, use 8 lbs of Pilsner LME and 0.25 lbs of Munich LME. Sometimes Spalt hops are difficult to find (especially with the hop shortage). You can substitute the Spalt hops with Saaz, Hallertau, or Tettnanger. Mt. Hood can also be used. The hop you select is strictly for bittering, because Kölsch should have little to no hop flavor and no hop aroma.

    Mash the grain for 90 minutes at 150°F (65°C). This should give you a good fermentable wort. Boil the wort for 90 minutes. At the 60 minute mark, add your hops.

    Ferment the beer at 60°F (15°C) or as close as you can get to 60°F (15°C). Once the fermentation is complete, find a cold place to store the beer for a few weeks. A lagering period will help the beer if you can do it, but don’t sweat it if you can’t.

    At bottling, add 1 ¼ cup of light DME that is boiled in 2 cups of water for 10 minutes. If you are kegging, carbonate the beer to 2.5 volumes.


    Source:  Beersmith.com 

    Picture by: Joe Marinaro